|
Nour Plastic
Nour Plastic paint high quality plastic washable and resistant to fungi for internal use and external of acrylic resins plant high-quality rubber and dyes and fillers give high resistance to weathering.
Use:
Nour plastic used on the internal and external surfaces cement _ walls roughing) regular and ceilings, gypsum and asbestos and GRC
Features:
1. Nour plastic factory in accordance with the Egyptian international standard specifications.
2. Give a matte surface with attractive cover and high per capita rates.
3. Little odor when applied.
4. Resistant to atmospheric agents inside and outside with the ability to wash.
5. Multiple colors by color Kartlh fixed resistance to atmospheric agents.
6. Characterized Nour Plastic flexibility that allows cracks will not occur with time
7. Alkali-resistant fungi and bacteria.
Technical Specifications:
At a temperature of 25 degrees Celsius and 60% humidity.
Color / gloss |
White and colored by color Kartlh / matte |
Specific Gravity |
1.61 g / cm 3 almost |
Percentage of solids |
62.8% (by volume) |
Per capita theoretical |
12 m 2 / L 50 microns thick layer |
Time of drought |
15 minutes superficial - total 3 - 4 hours |
Time re-paint |
3 hours minimum |
Dilution rate |
Reduce by 10 - 15% clean water with good stirring |
Method of application:
1. Cleans the surface to be paint dust and impurities and oils preferably applied face selinour to close the pores.
2. Apply two coats of paste at the Xnour) required surface (
3. Eases as needed with clean water from 10: 15% and stir well manually or automatically.
4. Is an individual face or two coats of at Nour plastic required surface brushing or Rolla cotton or spray gun (the desired shape (taking into account the time of re-paint.
Method of application:
1. Cleans the surface to be paint dust and impurities and oils preferably applied face selinour to close the pores.
2. Apply two coats of paste at the Xnour) required surface (
3. Eases as needed with clean water from 10: 15% and stir well manually or automatically.
4. Is an individual face or two coats of at Nour plastic required surface brushing or Rolla cotton or spray gun (the desired shape (taking into account the time of re-paint.
Storage and packaging:
|
